filename: TFS1080C.doc version 1.1 05.04.2011 vectron international filter specification tfs 1080 c 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: input: 50 output: 50 characteristics the maximum attenuation in the passband is defined as the insertion loss a e . the nominal frequency f n is fixed at 1080,0 mhz without any tolerance or limit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss in pb a e 2,2 db max. 3,0 db insertion loss in pb1 a e 2,2 db max. 3,5 db nominal frequency f n - 1080,0 mhz passband pb - f n 1,75 mhz passband pb1 - f n 3,50 mhz absolute attenuation a abs 0,3 mhz ? 1050,0 mhz 48 db min. 40 db 1050,0 mhz ? 1062,5 mhz 38 db min. 25 db 1062,5 mhz ? 1067,5 mhz 8 db min. 5 db 1092,5 mhz ? 1097,5 mhz 10 db min. 5 db 1097,5 mhz ? 1120,0 mhz 37 db min. 30 db 1120 mhz ? 2000 mhz 45 db min. 40 db group delay ripple - 1076,5 mhz ? 1077,5 mhz 18 ns max. 105 ns 1077,5 mhz ? 1078,25 mhz 13 ns max. 33 ns 1078,25 mhz ? 1081,75 mhz 18 ns max. 25 ns 1081,75 mhz ? 1082,5 mhz 22 ns max. 33 ns 1082,5 mhz ? 1083,5 mhz 29 ns max. 105 ns return loss within pb1 15 db min. 12 db operating temperature range otr - - 45 c ... + 85c storage temperature range - - 55 c ... + 105c temperature coefficient of frequency tc f * -36 ppm/k *) ? f c (hz) = tc f (ppm/k) x (t - t o ) x f cat (mhz) generated: checked / approved:
filename: TFS1080C.doc version 1.1 05.04.2011 vectron international filter specification tfs 1080 c 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic 700 800 900 1000 1100 1200 1300 1400 -80 -70 -60 -50 -40 -30 -20 -10 0 frequency in mhz magnitude in db 1050 1060 1070 1080 1090 1100 1110 -12 -10 -8 -6 -4 -2 0 frequency in mhz magnitude in db 1050 1060 1070 1080 1090 1100 1110 0 0.05 0.1 0.15 0.2 0.25 0.3 delay in s construction and pin connection (all dimensions in mm) 1 2 3 5 6 7 4 8 1,2 max. 0,6 3,0 +/-0,15 0,6 1,5 0,6 6 0 g r d . 1 3 7 5 date code 50 test circuit 2 6 1, 3, 4, 5, 7, 8 a80 c b15 1 ground 2 input 3 ground 4 ground 5 ground 6 output 7 ground 8 ground date code: year + week a 2010 b 2011 c 2012 ... l1 saw l2
filename: TFS1080C.doc version 1.1 05.04.2011 vectron international filter specification tfs 1080 c 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respe ctively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 1 0 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2002/95/eg, 2005/618 /eg) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,3 0,1 reel (all dimensions in mm) a : 180 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 60 c : 13,0 0,2
filename: TFS1080C.doc version 1.1 05.04.2011 vectron international filter specification tfs 1080 c 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: TFS1080C.doc version 1.1 05.04.2011 vectron international filter specification tfs 1080 c 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh & co. kg reserves the ri ght to make changes to the product(s) and/or inform ation contained herein without notice. no liability is assumed as a result of the ir use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of development specification noack 12.07.2010 1.1 - change from development spec to filter spec molke 05.04.2011 - typical values added - filter characteristic added
|
